starting to build new gui

MCDAQcontrolsignals.py

  # -*- coding: utf-8 -*-
 """
-
-
-This is a temporary script file.
+Here the class of control signals are created. There are two types: analog and digital.
 """
+import numpy as np
 from ADoutputs import daq_AO, daq_DO
 from PyQt5 import QtCore
+from subclasses.controllayouts import LaserControlLayout
+from subclasses.controllayouts import LaserScanLayout
 
 AO_TYPES = ['cavity_piezo', 'electrode', 'laser_piezo']
 
 class anal_control_signal(QtCore.QObject):
-    _registry = []
+	_registry = []
+	scanStepSignal = QtCore.pyqtSignal(float) 
+	scanEndSignal = QtCore.pyqtSignal(float)
 
 	def __init__(self, name, channel, ao_type, out_minimum = -10, out_maximum = 10, out_step = 0.1, feedfoward = False):
 		super().__init__()
@@ -21,13 +24,62 @@ class anal_control_signal(QtCore.QObject):
 		self.name = name
 		self.ch = channel
 		self.ao_type = ao_type
-
+		try:
+		    self.AO = daq_AO(self.ch)
+		except:
+		    show_warning('Analog output %i not found. Daq might not be connected' % self.ch) 
 		self.is_feedwoward_enabled = feedfoward
-
 		self.initial_value = 0
-
 		self.max = out_maximum
 		self.min = out_minimum
 		self.step = out_step
 		self.siPrefix = True
-		self.suffix = 'V'
\ No newline at end of file
+		self.suffix = 'V'
+
+		self.scanTimer = QtCore.QTimer()
+		self.current_scan_step = 0
+		self.scan_array_gen = None
+
+	def make_connections(self, frontend):
+		# internal connections
+		# external connections
+
+		for layout in LaserControlLayout._registry:
+			if self.name in layout.spinboxes:
+				print(self.name, ' connected', layout.name)
+				layout.spinboxes[self.name].setMinimum(self.min)
+				layout.spinboxes[self.name].setMaximum(self.max)
+				layout.spinboxes[self.name].setValue(self.initial_value)
+				layout.spinboxes[self.name].sigValueChanging.connect(self.sb_change)
+		
+		scan_layouts = [l for l in LaserScanLayout._registry if l.name == self.name]
+		for scan_layout in scan_layouts:
+			scan_layout.spinboxes['start'].setMinimum(self.min)
+			scan_layout.spinboxes['start'].setMaximum(self.max)
+			scan_layout.spinboxes['stop'].setMinimum(self.min)
+			scan_layout.spinboxes['stop'].setMaximum(self.max)
+
+	def name(self):
+		return self.name
+
+	def scan_event(self):
+		self.current_scan_step = next(self.scan_array_gen)
+		self.AO.set_out(self.current_scan_step)
+		self.scanStepSignal.emit(self.current_scan_step)
+
+	@QtCore.pyqtSlot(object)
+	def scan_action(self, scan_array_gen):
+		print('action')
+		if self.scanTimer.isActive():
+			print('stop timer')
+			self.scanTimer.stop()
+			self.scanEndSignal.emit(self.current_scan_step)
+		else:
+			print('start timer')
+			self.scan_array_gen = scan_array_gen
+			self.scanTimer.start(5.0)
+
+	@QtCore.pyqtSlot(object, object)
+	def sb_change(self, sb, value):
+		self.AO.set_out(value)
+

controlGui.py

+# -*- coding: utf-8 -*-
+"""
+
+This is the gui where the spinboxes and checkboxes for controlling the mc daq live. Nevertheless, measurements are not
+controlled from this Gui. It is more for searching and exploring the paremeters. 
+
+@author: Usuario
+"""
+import sys
+from PyQt5 import QtGui, QtCore
+import qdarkstyle
+import os
+os.environ['PYQTGRAPH_QT_LIB'] = 'PyQt5'
+
+from subclasses.controllayouts import LaserControlLayout
+from subclasses.controllayouts import LaserScanLayout
+from pyqtgraph import dockarea
+from MCDAQcontrolsignals import anal_control_signal
+
+class ControlGui(QtGui.QFrame):
+
+	def __init__(self):
+		super().__init__()
+		self.initUI()
+
+	def initUI(self):
+		self.area = dockarea.DockArea()
+		self.grid = QtGui.QGridLayout()
+		self.grid.addWidget(self.area, 0, 0)
+		self.setLayout(self.grid)
+
+		self.dock_397 = dockarea.Dock('397', (100, 100))
+		self.dock_866 = dockarea.Dock('866', (100, 100))
+		
+		self.area.addDock(self.dock_397)
+		self.area.addDock(self.dock_866, 'left', self.dock_397)
+
+		self.laser397_control_layout = LaserControlLayout('397', checkboxes=[], spinboxes = ['piezoA397', 'piezoB397'])
+		self.laser397_scan_layout = LaserScanLayout(name='piezoA397', signal_to_scan_layout=self.laser397_control_layout)
+		self.dock_397.addWidget(self.laser397_control_layout)
+		self.dock_397.addWidget(self.laser397_scan_layout)
+		
+		self.laser866_control_layout = LaserControlLayout('866', checkboxes=[], spinboxes = ['piezoA866', 'piezoB866'])
+		self.laser866_scan_layout = LaserScanLayout(name='piezoA866', signal_to_scan_layout=self.laser866_control_layout)
+		self.dock_866.addWidget(self.laser866_control_layout)
+		self.dock_866.addWidget(self.laser866_scan_layout)
+
+		self.show()
+
+	def make_connections(self, backend):
+		# external connections
+		scan_layout_list = [scan_layout for scan_layout in LaserScanLayout._registry if scan_layout.name == backend.name]
+		for scan_layout in scan_layout_list:
+			scan_layout.scanActionSignal.connect(backend.scan_action)
+			backend.scanStepSignal.connect(scan_layout.scan_step)
+			backend.scanEndSignal.connect(scan_layout.scan_end)
+
+
+		
+if __name__ == '__main__':
+	app = QtGui.QApplication([])
+	controlGui = ControlGui()
+	piezoA397 = anal_control_signal('piezoA397', channel=0, ao_type='cavity_piezo', out_minimum = 0, out_maximum = 4)
+	piezoB397 = anal_control_signal('piezoB397', channel=1, ao_type='cavity_piezo')
+	piezoA866 = anal_control_signal('piezoA866', channel=2, ao_type='cavity_piezo', out_minimum = 0, out_maximum = 4)
+	piezoB866 = anal_control_signal('piezoB866', channel=3, ao_type='cavity_piezo')
+
+
+
+	mcDAQthread = QtCore.QThread()
+	for ao in anal_control_signal._registry:
+		controlGui.make_connections(ao)
+		ao.make_connections(controlGui)
+		ao.moveToThread(mcDAQthread)
+		ao.scanTimer.moveToThread(mcDAQthread)
+		ao.scanTimer.timeout.connect(ao.scan_event)
+
+	mcDAQthread.start()
+
+	sys.exit(app.exec_())
\ No newline at end of file

myWidgets.py

@@ -172,29 +172,17 @@ class anal_control_signal(QWidget):
             self.scan_sb_start.setEnabled(True)
             self.scan_sb_stop.setEnabled(True)
             
-            
         else:
             
-            dt = 5.0e-3
-                        
+            dt = 5.0e-3            
             first_value = float(self.sb.val)            
             self.scan_array = scanFunctions.create_scan_array(self.scan_sb_start.val, self.scan_sb_stop.val, self.scan_sb_period.val, first_value, dt)
             self.scan_array_gen = scanFunctions.yield_scan_array(self.scan_array)
-            
             self.scan_array_feedfoward = scanFunctions.create_scan_array(self.scan_sb_start.val, self.scan_sb_stop.val,
                                                                          self.scan_sb_period.val, first_value, dt,
                                                                          normalized=True, normalization_constant = float(self.scan_feedfoward_sb.val) )
             self.scan_array_feedfoward_gen = scanFunctions.yield_scan_array(self.scan_array_feedfoward)
-            
-#            import pylab as plt
-#            plt.figure()
-#            plt.plot(self.scan_array, label = 'scan')
-#            plt.plot(self.scan_array_feedfoward, label = 'feedfoward')
-#            plt.legend()
-#            plt.xlabel('u.a'), plt.ylabel('Voltaje [V]')
-#            plt.show()
-#            
-            
+
             if first_value > float(self.scan_sb_stop.val) or first_value < float(self.scan_sb_start.val):
                 details = 'Remember remember the fifth of November.' + '\n' + 'Also remember that scan starts from the value of the corresponding spin box'
                 show_warning('Scan can not start outside scan range and scan start should be lower than scan stop', details_text= details)

subclasses/controllayouts.py

@@ -2,30 +2,33 @@ from pyqtgraph import dockarea
 from pyqtgraph.Qt import QtGui, QtCore
 from PyQt5.QtWidgets import QPushButton, QProgressBar, QLabel
 import pyqtgraph as pg
+import numpy as np
+import scanFunctions 
+from messages import show_warning
 
 
 
 class CustomSpinBox(pg.SpinBox):
 	def __init__(self, *args, **kwargs):
 		super().__init__(*args, **kwargs)
-
-		self.setContextMenuPolicy(QtCore.Qt.CustomContextMenu)
-		self.customContextMenuRequested.connect(self._on_context_menu)
-		self.popMenu = QtGui.QMenu(self)
-		self.act_2_step = QtGui.QAction('2 mV step', self)
-		self.act_5_step = QtGui.QAction('5 mV step', self)
-		self.act_10_step = QtGui.QAction('10 mV step', self)
-		self.act_100_step = QtGui.QAction('100 mV step', self)
-
-		self.popMenu.addAction(self.act_2_step)
-		self.popMenu.addAction(self.act_5_step)   
-		self.popMenu.addAction(self.act_10_step)
-		self.popMenu.addAction(self.act_100_step)
-
-		self.act_2_step.triggered.connect(lambda: self.setSingleStep(0.002))
-		self.act_5_step.triggered.connect(lambda: self.setSingleStep(0.005))
-		self.act_10_step.triggered.connect(lambda: self.setSingleStep(0.01))
-		self.act_100_step.triggered.connect(lambda: self.setSingleStep(0.1))
+		if self.opts['suffix'] == 'V': # fixing a context menu with some scales 
+			self.setContextMenuPolicy(QtCore.Qt.CustomContextMenu)
+			self.customContextMenuRequested.connect(self._on_context_menu)
+			self.popMenu = QtGui.QMenu(self)
+			self.act_2_step = QtGui.QAction('2 mV step', self)
+			self.act_5_step = QtGui.QAction('5 mV step', self)
+			self.act_10_step = QtGui.QAction('10 mV step', self)
+			self.act_100_step = QtGui.QAction('100 mV step', self)
+
+			self.popMenu.addAction(self.act_2_step)
+			self.popMenu.addAction(self.act_5_step)   
+			self.popMenu.addAction(self.act_10_step)
+			self.popMenu.addAction(self.act_100_step)
+
+			self.act_2_step.triggered.connect(lambda: self.setSingleStep(0.002))
+			self.act_5_step.triggered.connect(lambda: self.setSingleStep(0.005))
+			self.act_10_step.triggered.connect(lambda: self.setSingleStep(0.01))
+			self.act_100_step.triggered.connect(lambda: self.setSingleStep(0.1))
 
 	def _on_context_menu(self, point):
 		# show context menu
@@ -35,15 +38,17 @@ class LaserControlLayout(pg.LayoutWidget):
 	"""
 	A class for creating a layout with spinboxes and checkboxes to control a laser. 
 	"""
+	_registry = []
 	def __init__(self, name, spinboxes = ['sbA', 'sbB'], checkboxes = ['cbA', 'cbB']):
 		super().__init__()
+		self._registry.append(self)
 		self.name = name
 		self.layout.addWidget(QtGui.QLabel(self.name), 0, 0)
 		self.spinboxes = {}
 		self.checkboxes = {}
 
 		for i, sb_name in enumerate(spinboxes, start = 1):
-			self.spinboxes[sb_name] = CustomSpinBox()
+			self.spinboxes[sb_name] = CustomSpinBox(siPrefix=True, suffix='V')
 			self.addWidget(QtGui.QLabel(sb_name), i, 0)
 			self.addWidget(self.spinboxes[sb_name], i, 1)
 
@@ -59,15 +64,19 @@ class LaserScanLayout(pg.LayoutWidget):
 	"""
 	A class for creating a layout for scanning a laser piezo. 
 	"""
-	def __init__(self, name, feedforward_enables = False):
+	_registry = []
+	scanActionSignal = QtCore.pyqtSignal(object)
+
+	def __init__(self, name, signal_to_scan_layout, feedforward_enables = False):
 		super().__init__()
+		self._registry.append(self)
 		self.name = name
-
+		self.signal_to_scan_layout = signal_to_scan_layout
 		self.addWidget(QtGui.QLabel(self.name), 0, 0)
 		self.spinboxes = {}
-		self.spinboxes['start'] = CustomSpinBox()
-		self.spinboxes['stop'] = CustomSpinBox()
-		self.spinboxes['period'] = CustomSpinBox()
+		self.spinboxes['start'] = CustomSpinBox(siPrefix=True, suffix='V')
+		self.spinboxes['stop'] = CustomSpinBox(siPrefix=True, suffix='V')
+		self.spinboxes['period'] = CustomSpinBox(siPrefix=True, suffix='s')
 		self.scan_button = QPushButton('Start scan')
 		self.scanpBar = QProgressBar(self)
 		self.scanLabelValue = QLabel(self)
@@ -84,7 +93,57 @@ class LaserScanLayout(pg.LayoutWidget):
 		self.addWidget(self.scanLabelValue, 5, 0)
 		self.addWidget(self.scanpBar, 5, 1)
     
+		self.scan_button.clicked.connect(self._scan_button_clicked)
 
+	def name(self):
+		return self.name
+		
+	@QtCore.pyqtSlot()
+	def _scan_button_clicked(self):
+
+		start = self.spinboxes['start'].value()
+		stop = self.spinboxes['stop'].value()
+		period = self.spinboxes['period'].value()
+		dt = 5.0e-3            
+		first_value = float(self.signal_to_scan_layout.spinboxes[self.name].value())            
+		scan_array = scanFunctions.create_scan_array(start, stop, period, first_value, dt)
+		scan_array_gen = scanFunctions.yield_scan_array(scan_array)
+		if first_value > float(stop) or first_value < float(start):
+			details = 'Remember remember the fifth of November.' + '\n' + 'Also remember that scan starts from the value of the corresponding spin box'
+			show_warning('Scan can not start outside scan range and scan start should be lower than scan stop', details_text= details)
+		elif len(scan_array) < 5:
+			show_warning('%i steps are too few, you need at least 5 steps' % (len(scan_array)) )
+		elif stop==start:
+			show_warning('Oh dear, you might be trying to scan from 0 to 0. Plase never do that again.')
+
+		else:
+			self.scanActionSignal.emit(scan_array_gen)
+			self.scan_button.setText('Stop scan')
+			self.signal_to_scan_layout.spinboxes[self.name].setEnabled(False)
+			self.spinboxes['start'].setEnabled(False)
+			self.spinboxes['stop'].setEnabled(False)
+			self.scan_button.setStyleSheet("background-color: green")
+			self.scan_button.setText('Scanning')
+
+	@QtCore.pyqtSlot(float)
+	def scan_step(self, val):
+		self.pBarEvent(val)
+	
+	@QtCore.pyqtSlot(float)
+	def scan_end(self, val):
+		self.signal_to_scan_layout.spinboxes[self.name].setValue(val)
+		self.scan_button.setText('Start scan')
+		self.scan_button.setStyleSheet('background-color: None')
+		self.signal_to_scan_layout.spinboxes[self.name].setEnabled(True)
+		self.spinboxes['start'].setEnabled(True)
+		self.spinboxes['stop'].setEnabled(True)
+
+	def pBarEvent(self, current_step):
+		start = self.spinboxes['start'].value()
+		stop = self.spinboxes['stop'].value()	
+		self.scanpBar.setValue( 100 * float(current_step-float(start))/float(stop-start)   )
+		self.scanLabelValue.setText("%.2f" % current_step + ' V')
+		
 
 if __name__ == '__main__':
 	import sys